What is Active Carbon used for in an Aquarium?

Have you ever found yourself staring at the shelves of your local pet store, bewildered by the array of products promising to keep your aquarium water crystal clear? Among these, you’ve probably noticed containers of something called “active carbonOpens in a new tab..

But what is this mysterious substance, and why is it so commonly recommended for aquarium use? Let’s say, for instance, you’ve noticed your aquarium water turning a bit cloudy, or perhaps your shrimps seem less active than usual. Could active carbon be the solution to these issues?

Active carbon, also known as activated charcoal, is a form of carbon processed to have small, low-volume pores that increase the surface area available for adsorption or chemical reactions. In an aquarium, it’s primarily used to remove impurities and toxins from the water, contributing to a healthier and cleaner environment for your aquatic friends. It can help clear up cloudy water, remove odors, and even detoxify metals. However, it’s not a cure-all and should be used as part of a comprehensive water management strategy.

When I first plunged into the world of shrimp keeping, I was as green as the algae that would later bloom in my tanks. It was a time of excitement, curiosity, and, admittedly, a fair share of confusion,and I was just beginning to navigate the vast ocean of aquarium maintenance.

One of the first challenges I encountered was maintaining the water quality in my shrimp tanks. Despite regular water changes and careful feeding, I noticed the water would often turn cloudy, and there was a persistent, unpleasant odor. I also observed that my shrimps were not as active as they should be, and their colors were not as vibrant.

After some research and advice from fellow shrimp enthusiasts, I decided to try using active carbon in my filters. The transformation was nothing short of remarkable. Within a few days, the water became clearer, the odor disappeared, and my shrimps seemed happier and more active.

Since then, active carbon has become a staple in my aquarium maintenance routine. However, it wasn’t always smooth sailing. I had to learn the hard way that active carbon is not a magic bullet. It’s a tool, and like any tool, it works best when used correctly and as part of a comprehensive strategy.

In this post, I’ll share my experiences and insights about using active carbon in an aquarium, hoping to shed some light on this often misunderstood aquarium essential.

Active Carbon
Active Carbon

How Does Active Carbon Work in an Aquarium?

Active carbon works in an aquarium through a process called adsorption (not to be confused with absorption). This is a chemical reaction where certain substances are attracted to activated carbon and bond with it. The large surface area of active carbon, thanks to its many tiny pores, provides ample space for these substances to adhere.

When you place active carbon in your aquarium filter, the water passes over it. As it does so, impurities in the water, such as certain chemicals, heavy metals, and even some forms of algae, are attracted to the carbon. They bond with the carbon and are effectively removed from the water.

This process continues until all the pores in the active carbon are filled with impurities. At this point, the active carbon is considered “exhausted” and needs to be replaced. The duration of this process can vary depending on the specific conditions in your aquarium, but typically, active carbon needs to be replaced every 3-4 weeks.

It’s important to note that while active carbon is excellent at removing many impurities, it doesn’t discriminate between harmful and beneficial substances. This means it can also remove some beneficial elements from the water, such as certain medications or trace elements needed by plants and shrimps. Therefore, using active carbon judiciously and as part of a broader water management strategy is crucial.

What Types of Impurities Can Active Carbon Remove?

Active carbon is a bit of a wonder when it comes to removing impurities from your aquarium water. Its porous nature and large surface area make it a magnet for a variety of unwanted substances. Here’s a rundown of some of the main impurities that active carbon can help eliminate:

  1. Organic Compounds: Active carbon is excellent at adsorbing organic compounds, which can contribute to water cloudiness and unpleasant odors. These compounds can come from various sources, including uneaten food, plant decay, and waste products from your shrimps.
  2. Chemicals: If you’ve recently treated your aquarium with medication like no planaria, active carbon can help remove any residual chemicals once the treatment is complete. It’s also useful for removing chlorine and chloramines if you’re using tap water in your aquarium.
  3. Heavy Metals: Active carbon can adsorb some heavy metals, which can be harmful to shrimps and other aquatic life. However, it’s not a substitute for using water that’s appropriately conditioned and safe for your aquarium in the first place.
  4. Certain Algae Byproducts: Some forms of algae release compounds into the water that can be harmful to your shrimps. Active carbon can help by adsorbing these compounds.
  5. Dyes and Tannins: If you’ve added something to your aquarium that’s leaching dyes or tannins into the water (like certain types of driftwood), active carbon can help clear up the discoloration.

How Should You Use Active Carbon in Your Aquarium?

Using active carbon in your aquarium is relatively straightforward, but there are a few key points to keep in mind to ensure you’re using it effectively and safely.

  1. Placement: Active carbon is typically placed in the filter of your aquarium. This allows the water to flow over it, maximizing the contact between the water and the carbon, which in turn maximizes the adsorption of impurities.
  2. Quantity: The amount of active carbon you need will depend on the size of your aquarium. A general rule of thumb is to use around 1 gram of active carbon for every gallon of water in your aquarium. However, always refer to the manufacturer’s instructions, as different brands may have different recommendations.
  3. Preparation: Before you add active carbon to your filter, it’s important to rinse it thoroughly with clean water. This will remove any dust or fine particles that could otherwise cloud your aquarium water.
  4. Replacement: Active carbon doesn’t last forever. Once all its pores are filled with impurities, it won’t be able to adsorb any more. Typically, you should replace the active carbon in your filter every 3-4 weeks. However, this can vary depending on the specific conditions in your aquarium, so keep an eye on water clarity and odor as indicators of when it’s time to replace the carbon.
  5. Use During Medication: If you’re treating your aquarium with medication, remove the active carbon from your filter. As mentioned earlier, active carbon can adsorb the medication, reducing its effectiveness. Once the treatment is complete and you’ve done a water changeOpens in a new tab., you can add fresh active carbon to help remove any residual medication.
  6. Intermittent Use: It’s worth noting that continuous use of active carbon can strip your tank of certain nutrients over time, which can be especially problematic in planted tanks. A sign of this nutrient depletion can be yellowing leaves on your plants. Therefore, consider using active carbon intermittently, such as after an issue with medication or potential contamination from pesticides, like accidental flea and tick treatments getting on your hands from your pets.

Remember, active carbon is a tool to help maintain water quality, not a substitute for good aquarium management. Regular water changes, appropriate feeding, and careful stocking are all crucial for a healthy aquarium.

In Summary: The Role of Active Carbon in Your Aquarium

To make a long story short, active carbon plays a significant role in maintaining the water quality in your aquarium. Its ability to adsorb a wide range of impurities, from organic compounds to heavy metals, makes it a valuable tool in your aquarium maintenance arsenal. However, it’s not a magic bullet. It should be used judiciously and as part of a comprehensive water management strategy that includes regular water changes, appropriate feeding, and careful stocking.

If you’re new to using active carbon, don’t be daunted. Start with the basics, monitor your water quality, and adjust as needed. Remember, every aquarium is unique, and what works best will depend on your specific circumstances.

Lastly, if you need any help or have any questions about using active carbon in your aquarium, please don’t hesitate to reach out. If you can’t reach me here, check out the Aquarium Shrimp Keeping group on Facebook. There’s a whole community of shrimp enthusiasts ready to share their experiences and advice.

On a final note, remember that the goal of all this is to create a healthy and happy environment for your shrimps. So, keep learning, keep experimenting, and most importantly, keep enjoying the wonderful world of shrimp keeping. Happy Shrimp Keeping!

FAQ

Q. Should I use activated carbon in my aquarium?
A. Yes, using activated carbon in your aquarium can be beneficial. It helps remove various impurities, including organic compounds, chemicals, heavy metals, and certain algae byproducts. However, it’s not a cure-all and should be used as part of a comprehensive water management strategy.

Q. How much activated carbon should I put in my aquarium?
A. The amount of active carbon you need will depend on the size of your aquarium. A general rule of thumb is to use around 1 gram of active carbon for every gallon of water in your aquarium. However, always refer to the manufacturer’s instructions, as different brands may have different recommendations.

Q. Does activated carbon lower pH in aquarium?
A. No, activated carbon does not directly alter the pH of your aquarium water. Its primary function is to adsorb impurities from the water, not to adjust its pH. If you need to adjust the pH in your aquarium, consider using a pH buffer or adjusting the water’s hardness.

Q. Can you put too much activated carbon in a fish tank?
A. While using too much active carbon is not typically harmful, it can be unnecessary and wasteful. Using the recommended amount (usually around 1 gram per gallon of water) is generally sufficient to remove impurities from the water.

Q. Should I remove activated carbon when treating my aquarium with medication?
A. Yes, if you’re treating your aquarium with medication, it’s advisable to remove the active carbon from your filter. Active carbon can adsorb the medication, reducing its effectiveness. Once the treatment is complete and you’ve done a water changeOpens in a new tab., you can add fresh active carbon to help remove any residual medication.

Mark

Mark has been passionate about aquariums for over 40 years.

Recent Posts